pcAnywhere Host and Remote | TechSoup Europe

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
You can also remove subnets from Symantec pcAnywhere Gateway Ending a session returns you to the main Symantec pcAnywhere window. Skip to Main Content Area. When the installation is complete, you can use Symantec pcAnywhere Mobile on your device.
 
 

Symantec pcanywhere 12.5 sp4 free download

 

Users are strongly advised to upgrade to the latest release. All references have been updated in this advisory to point to the new TECH Symantec recommends all pcAnywhere users move to the latest release of their respective product. An attacker can send a malicious login to trigger this vulnerability, which may result in arbitrary code execution. When handling an authentication request, the process copies the user supplied username unsafely to a fixed-length buffer of size 0x This process listens on TCP port Authentication is not required to exploit this vulnerability.

The flaw exists within the awhost32 component which is used when handling incoming connections. When handling an authentication request the process copies the user supplied username unsafely to a fixed-length buffer of size 0x To save these settings as an executable file that can be used for later Symantec pcAnywhere also lets you deny the connection if the host and the remote are using a lower level of encryption.

Encryption can also be denied if the algorithm is different. Page Supporting Computers And Servers Remotely What you can do during a remote management session About Symantec pcAnywhere Remote Management tools The Remote Management tools in Symantec pcAnywhere provide easy access to commonly used administrator tools so that you can quickly resolve computer problems over a remote connection.

A remote management session uses less bandwidth than a full remote control session because only data needs to be transmitted between the host and remote computers.

Page Ways To Start A Remote Management Session Ways to start a remote management session Remote management connections are supported over network and modem connections. You must be in a session to access most tools. Symantec pcAnywhere lets you start a remote management session in the following ways: Starting a remote connection item Page What You Can Do During A Remote Management Session Supporting computers and servers remotely What you can do during a remote management session What you can do during a remote management session Table lists the tasks that you can perform during a remote management session.

Remote Management tasks Table Task Description Page Managing Tasks Remotely Supporting computers and servers remotely What you can do during a remote management session Remote Management tasks continued Table Task Description Change Computer State Lets you remotely lock, restart, or shut down a host computer or log off the user who is logged on to the host computer.

Page Running Dos Commands Supporting computers and servers remotely What you can do during a remote management session To view or change program status In the Session Manager window, on the left navigation bar, under Session Manager, click Remote Management.

Under Remote Management, click Task Manager. To change program status, in the right pane, on the Applications tab, select one of the following: New Task Page The Command Prompt may become unresponsive if you type an unsupported command that is not included in this list. Symantec pcAnywhere lets you manage the exclusion list by adding or removing commands. This includes custom key mapping, executable commands, and other user-defined commands.

To edit the exclusion list out of session In the Symantec pcAnywhere window, on the Edit menu, click Preferences. Page Supporting computers and servers remotely What you can do during a remote management session To start or stop a service In the Session Manager window, on the left navigation bar, under Session Manager, click Remote Management. Under Remote Management, click Services. In the right pane, right-click the service that you want to change, and then select one of the following: Start Service Non-MAPI-enabled email programs might not support this feature.

Symantec pcAnywhere stores the system file in memory on the local computer as you work in the Edit System Files window. When you end the remote management session, pcAnywhere prompts you to save the file. The contents of the file appear in the top portion of the window. Symantec pcAnywhere copies the contents of the system file onto the remote computer, where it is stored in memory. If the system file is large, this might take some time.

Symantec pcAnywhere lets you view the event log and save the event log files locally in a comma-separated values CSV format file. You can also forward the file to others by email if the email program that is installed on your computer supports MAPI. Restarting or shutting down a host computer during a remote management session Symantec pcAnywhere lets you remotely restart or shut down a host computer during a remote management session.

The remote management session ends after you send the command. Page Locking A Computer Or Logging Off A User During A Remote Management Session Locking a computer or logging off a user during a remote management session Symantec pcAnywhere lets you remotely lock a host computer or log off the user who is logged on to the host computer during a remote management session.

Sending system state commands to one or more computers Symantec pcAnywhere lets you send a shut down, restart, log off user, or lock computer command to one or more computers without starting a full remote session. When you select one of these commands, pcAnywhere prompts you for caller logon credentials and configuration information to connect to the host computers.

Page Configuring host logon credentials for remote management Symantec pcAnywhere requires a user name and password for all host sessions. To send a remote management command to one or more computers from pcAnywhere Manager, you must specify the pcAnywhere caller credentials that are needed to log on to the host computer.

Page Supporting computers and servers remotely What you can do during a remote management session To override any preconfigured logon credentials in a remote connection item, check Ignore login settings configured in remote items. In the Host Login dialog box, type your computer logon credentials.

The operating system limits the tasks that you can perform based on your user privileges. Ending a remote management session Ending a session returns you to the main Symantec pcAnywhere window. The end of session options that are configured for the host connection item determine whether the host waits for another connection or is canceled.

The caller rights Page Supporting computers and servers remotely What you can do during a remote management session that are configured for the host connection item determine whether the remote user is allowed to cancel the host. To end a remote management session In the Session Manager window, on the left navigation bar, under Session Manager, click End Session. Page Transferring Files And Folders Chapter Transferring files and folders This chapter includes the following topics: About pcAnywhere File Transfer About file transfer preferences Ways to start a file transfer session About synchronization and cloning About pcAnywhere File Transfer The pcAnywhere File Transfer window lets you quickly navigate to the files and folders that you need, transfer files and folders to and from another computer, and synchronize content.

This list is dynamic. The most recently typed path name is listed at the top, and older path names are replaced by newer ones. To tag all files in a folder In the File Transfer window, open the folder that contains the files that you want. If you are typing a string of wildcard characters, use a comma to separate the entries. Page Comparing Folders Comparing folders The Compare Folders feature lets you quickly determine how closely the contents of two folders match.

Symantec pcAnywhere compares the contents of the folders on the host and remote computers and highlights any differences. Symantec pcAnywhere performs comparisons at the folder level. To compare the contents Page About File Transfer Preferences Selecting a start-up location Symantec pcAnywhere lets you specify the default directory or folder from which the File Transfer window opens on the remote computer after a session is started.

The File Transfer window automatically open in the location of the most recent file transfer, but you can change the start-up location. In Windows Vista, the operating system might prompt you to approve this action.

Ways to start a file transfer session Symantec pcAnywhere lets you start a file transfer session in the following ways: Starting a remote connection item that is configured to start in File Transfer mode Using Quick Connect Page Canceling A File Transfer Operation Transferring files and folders Ways to start a file transfer session that is included in the operation.

Symantec pcAnywhere adds the file or folder name, the source and destination path, and the operation and its status to the Command Queue. You can save the contents of the Command Queue to a command queue file so that you can automate future tasks.

To pause a file transfer operation In the File Transfer window, click Pause. To release the pause, click Pause again. Viewing the Command Queue during a file transfer operation While a file transfer is in progress, you can select additional files for transfer and perform other tasks.

Page Synchronizing Folders By File Type Transferring files and folders About synchronization and cloning Synchronizing folders by file type You can limit the synchronization between folders to certain file types. Symantec pcAnywhere lets you save these commands in a queue file. The following are examples of how you can use a command queue file: Distribute and install software updates on one or more computers. Page Using Command Queue Files To Automate Tasks Automating file transfer and management tasks Using command queue files to automate tasks You can add your command queue files to the Windows Task Scheduler to run them automatically.

Figure shows the Command Queue window during a session. Page Using Environment Variables Automating file transfer and management tasks Using command queue files to automate tasks Add a command to run the executable file, including the full path and any parameters. Add the list of host computers on which you want to install the software. Page Automating file transfer and management tasks Using command queue files to automate tasks To copy or move a file In the Symantec pcAnywhere window, on the left navigation bar, under pcAnywhere Manager, click Command Queues.

Do one of the following: To configure an existing command queue file, right-click the file, and then click Properties. Page Automating file transfer and management tasks Using command queue files to automate tasks To delete a file In the Symantec pcAnywhere window, on the left navigation bar, under pcAnywhere Manager, click Command Queues.

Page You must provide the full path to files and folders on the host computer. You can browse directories on the remote computer. To create a folder on the host or remote computer In the Symantec pcAnywhere window, on the left navigation bar, under pcAnywhere Manager, click Command Queues. To synchronize folders on the host and remote computers In the Symantec pcAnywhere window, on the left navigation bar, under pcAnywhere Manager, click Command Queues.

Arranging items in the queue file Symantec pcAnywhere runs the commands that are contained in the queue file sequentially, starting with the first item in the list. New commands that you add to the queue file are added to the bottom of the list.

You can edit a queue file to rearrange the order of the commands. In the Command Queues window, do one of the following: To configure an existing command queue file, right-click the file, and then click Properties.

Symantec pcAnywhere is configured with optimum settings for file transfer, but if you notice a difference in speed or performance, you should check the settings. Page Selecting End Of Session Options For Command Queues The options that you specify here will be carried out on each computer that is included in the remotes list. Keeping the connection open Symantec pcAnywhere lets you keep the connection open after running a command queue file so that you can perform other tasks.

Page Generating a command queue report automatically You can have pcAnywhere automatically generate a report that provides the results of the tasks in the command queue file.

Symantec pcAnywhere generates the report when the session ends. The report contains the commands that were executed during the session and their status. Page Click OK. Locking a computer or logging off a user Symantec pcAnywhere lets you automatically lock a host computer or log off the user who is logged on to the host computer after the queue file runs. To use these features, the host and remote computers must have the remote management components installed.

Page Automating file transfer and management tasks Using command queue files to automate tasks To lock a computer or log off a user In the Symantec pcAnywhere window, on the left navigation bar, under pcAnywhere Manager, click Command Queues. Page Using command queue files to automate tasks Restarting or shutting down a host computer Symantec pcAnywhere lets you automatically restart or shut down a host computer after the queue file runs.

Page Creating A Command Queue File During A Session Automating file transfer and management tasks Creating a command queue file during a session Select any of the following: Prompt user Notifies the user about the action that you are about to perform.

Select the number of seconds that the user has to respond to the prompt. Saving a command queue file Symantec pcAnywhere lets you save the Command Queue in a queue file that can be used later. You can also use the queue files with the Windows Task Scheduler to automate tasks. Symantec pcAnywhere saves the queue file. In the Save As dialog box, type a file name. If the Command Queue is already running, you must pause it first. If you have made changes in the Command Queue that have not been saved, pcAnywhere prompts you to save the changes first.

In the right pane, under Command Queues, double-click the command queue file that you want to run. Browse to the folder that contains your command queue files. Symantec pcAnywhere stores the command queue files in the pcAnywhere data directory by default.

Click Next. Page Automating file transfer and management tasks Running a command queue file Verify your settings. Click Finish. This adds the command queue file to the list of scheduled tasks in the Scheduled Task folder. Page Securing Your Computer And Sessions When you set up a host computer so that others can connect to it, one of your primary concerns should be to protect the host from unauthorized access.

Symantec pcAnywhere requires that you set up logon credentials for users who connect to your computer and that you select an authentication method to verify their identities. Page About Authentication In Pcanywhere Symantec pcAnywhere provides administrators with a number of global security options that help block unauthorized users at the point of entry. These options include serialization, centralized authentication, and strong encryption.

For more information on managing security in pcAnywhere, see the Symantec pcAnywhere Administrator’s Guide. About authentication in pcAnywhere In the right pane, under Hosts, right-click the connection item in which you want to configure the secondary authentication, and then click Properties. Page Protecting a host computer from unauthorized access Configuring a caller to use pcAnywhere Authentication Symantec pcAnywhere Authentication can be used on any operating system.

This method of authentication verifies whether a remote user has permission to connect to the host by checking the list of users and passwords that are maintained by pcAnywhere on the host computer. Page Protecting a host computer from unauthorized access To configure a caller to use directory-server-based authentication In the Symantec pcAnywhere window, in Advanced View, on the left navigation bar, click Hosts.

In the right pane, under Hosts, right-click the connection item that you want to configure, and then click Properties. SecurID validates users against a security code, which is generated by an authenticator and a user-provided PIN. Securing the host computer upon connection Symantec pcAnywhere lets you secure the host computer after you have made a remote connection. To secure the host computer upon connection In the Symantec pcAnywhere window, in Advanced View, on the left navigation bar, click Hosts.

Page Hiding The Host Name From Network Search Results For security reasons, a host user or administrator might not want the host name included in the list for example, to minimize a server’s exposure on a network. Symantec pcAnywhere lets you hide the host name from the search results. Page About Access Rights You can change these settings for an individual user or group of users.

Symantec pcAnywhere also lets you further limit users who connect to your computer from performing certain functions for example, restarting your computer. To set time limits for callers In the Symantec pcAnywhere window, in Advanced View, on the left navigation bar, click Hosts.

Page About Session Security In the And drop-down list, select the time of day in which the restriction ends for that day. About session security Symantec pcAnywhere provides the following options to help protect the security of your host sessions and to prevent others from inadvertently canceling your session: Keyboard and mouse Symantec pcAnywhere also lets you configure time limits for individual callers.

When you set a time limit for a session, To configure pcAnywhere to use symmetric encryption In the Symantec pcAnywhere window, in Advanced View, do one of the following: To configure a host computer to use encryption, on the left navigation bar, click Hosts. Page Certificates are data documents that contain identification information that includes the user’s name, public key, issuing authority, and data signature.

Symantec pcAnywhere requires that you use Microsoft-compatible certificates. You can obtain these from a commercial certificate authority for example, VeriSign or Entrust or from an internal certificate server. Sign in Join. Sign In Welcome! Log into your account Your username. Your password.

Sign Up Welcome! Register for an account Your email. Your username. Password Recovery Recover your password Your email. Description Changelog Specifications. Symantec pcAnywhere Key Benefits: Easy to use with streamlined connectivity and greater remote platform support. Easily connect to a desktop or server — anytime, from anywhere, even when using routers and firewalls.

Reduce security breaches by using certified secure remote control and multiple layers of security. Extensive Remote Management capabilities can resolve many common problems without the need for a full remote control session. This can generate an access violation resulting in the remote session being dropped but leaving the client session open in specific instances. This could potentially enable an unauthorized connection to the client session. A manual restart of the Symantec pcAnywhere service would be required.

Product updates are available to address these issues. Symantec engineers continue to review all functionality to further enhance the overall security of Symantec pcAnywhere. Updates will be identified in revisions to this advisory as required.

If Symantec pcAnywhere is installed but not required, it can be uninstalled from the system. Signatures are available through normal Symantec updates. Clarification for pcAnywhere versions prior to While older versions of pcAnywhere are affected.

 

Symantec pcanywhere 12.5 sp4 free download. pcAnywhere

 
Page 72 Click Finish. To locate a recent pcanuwhere connection item In Advanced View, on the left navigation bar, under pcAnywhere Manager, click History. Use Symantec Packager to create custom installations of pcAnywhere. Computer games download windows 10 lets you organize your workspace. Page Ways To Connect Another Computer From A Mobile Device Symantec pcanywhere 12.5 sp4 free download to connect another computer from a mobile device Ways to connect another computer from a mobile device Symantec pcAnywhere Mobile lets you connect to a host so4 in the following ways: Quick Connect You can use Quick Connect for one-time or infrequent connections to a host computer.

 
 

– Symantec pcAnywhere Multiple Vulnerabilities (SYM)

 
 
Symantec pcAnywhere provides secure remote access to computers and servers. It lets administrators quickly resolve help-desk and server support issues and. Symantec pcAnywhere is remote access software solution. It lets you manage computers, resolve helpdesk issues and connect to remote.