ATC, AUGI, AutoCAD, AutoCAD Learning Assistance, AutoCAD LT, AutoCAD Simulator, AutoCAD SQL Printed manual and help produced with Idiom WorldServer™. Download the latest service packs, hotfixes and other updates for AutoCAD LT.
Autodesk AutoCAD manual (English – 42 pages)
Whatever your need in getting your projet done, or documents, we are experienced enough to provide you with the business communication level suitable to your need. French mother tong and proficient in english for business we are the one skilled solution at This event is unique in our department. On this occasion, professional and Reunion Island Ideal for sporty, adventurous bon vivants.
Wake up with the glow of the first rays of the sun over the mangrove forest. First a hearty breakfast with a view of the islands Nosy Carry out your projects in complete safety June 17, For all your credit or financing needs, we offer our services.
Reliable and very secure with a good interest rate. The property is about 12 minutes drive from Bought 15th October at Conforma, guaranteed for 2 years. Selling because we are moving. No delivery available. To be collected in Lamentin.
PC3 file Partial plotter configuration file. PC3 files contain plot settings information such as the device driver and model, the output port to which the device is connected, and various device-specific settings, but do not include any custom plotter calibration or custom paper size information. PCP files contain basic plot specifications and pen parameters that were saved in previous versions. Plot settings that are stored in a PCP file include pen assignments, plotting units, paper size, plot rotation, plot origin, scale factor, and pen optimization level.
See also PC2 file and PC3 file. The performance tuner examines your graphics card and 3D display driver and decides whether to use software or hardware implementation for features that support both. Because its control vertices are not tangent to the object, if the curve is reshaped, it stays smooth and does not create kinks. See also clamp curve. Because its control vertices are not tangent to the object, if the surface is reshaped, it stays smooth and does not create kinks.
See also clamp surface. Objects appear smaller when the distance from the observer at the view point to the view center increases. Although a perspective view appears realistic, it does not preserve the shapes of objects.
Parallel lines seemingly converge in the view. Physically correct lights attenuate as the square of the distance. Photometry is the science of measurement of visible light in terms of its perceived brightness. When it calculates indirect illumination, the renderer traces photons emitted from a light. The photon is traced through the model, being reflected or transmitted by objects, until it strikes a diffuse surface. When it strikes a surface, the photon is stored in the photon map. For example, on a two-button mouse, it is the left button by default.
See also pre-selection set. PLAN playback The process of executing the actions stored in a previously recorded action macro. Plot styles are applied at plot time. Plot styles are defined in plot style tables and apply to objects only when the plot style table is attached to a layout or viewport.
The file containing custom plotter calibration and custom paper size information associated with plotter configuration file. A location in 3D space specified by X , Y , and Z coordinate values. An object consisting of a single coordinate location. POINT point cloud A large collection of points placed in model space that create a 3D representation of objects, geographic features, or areas. It occurs during the indexing of the scan files in Autodesk ReCap.
AutoCAD recognizes planar and cylindrical segments when object snapping to the point cloud or when extracting geometry from the point cloud. See also crosshairs. See also polar tracking. See also Polar Snap. Although you can continue to create polygonal and polyface mesh for example, by setting MESHTYPE to 0 , the newer, more flexible mesh type is recommended.
See also crossing selection and window selection. Also called pline. By default, a polysolid always has a rectangular profile.
You can specify the height and width of the profile. You can create primitive 3D solids and meshes. These include marble and wood. Also called template materials. Procedural surfaces are the only type of surface that can be associative.
This term is associated with the model documentation feature. See also custom object and object enabler. On the ribbon, pins keep panels expanded.
In the application menu, pins keep an item in the list of recently viewed items. PWT A template file format used to publish drawings to the Web. Quick View A tool to preview and switch between open drawings and layouts in a drawing.
Quick View image A thumbnail image of a drawing, layout or model space that is displayed using Quick View. Ray tracing traces the path of rays sampled from the light source. Shadows appear where rays have been blocked by objects. Ray-traced shadows have sharp edges. Reflections and refractions generated this way are physically accurate. You can also refine specified mesh faces without resetting the baseline level of smoothness for the object.
Also called specular color. You can create regions from objects that form closed loops. They area commonly created in order to apply hatching and shading, and to extrude in 3D.
After the geometry is edited, the constraints are either removed or retained based on whether the constraint is still valid for the edited geometry. When you click this grip, a drop-down list of the lookup values for that lookup property column in the lookup table is displayed.
When you select a value from the list, the corresponding input property values are assigned to the block reference. Depending on how the block was defined, this usually results in a change in the block reference’s geometry. RGB For red, green, and blue. A system of defining colors by specifying percentages of red, green, and blue.
Multiple ribbon panels, belonging to one workflow, are grouped together under a ribbon tab. A ribbon tab contains groups of multiple ribbon panels, each belonging to one workflow. A ribbon panel contains buttons and controls, related to a task.
A low roughness value simulates a shiny object metals, some plastics. A single row is one cell in height. Typically, one endpoint of the rubber-band line is attached to a point in your drawing, and the other endpoint is attached to the moving cursor.
It provides a “best guess” color for each rendered pixel. The renderer first samples the scene color at locations within the pixel or along the pixel’s edge, then uses a filter to combine the samples into a single pixel color.
For example, if an annotative object such as a label supports two annotation scales, it has two separate scale representations in two views displayed at two different scales. Script files are created outside the program using a text editor, saved in text format, and stored in an external file with the file extension. In a dynamic block definition, the geometry associated with an action. Shadow maps don’t show the color cast by transparent or translucent objects.
In contrast to ray-traced shadows, shadow maps have softer edges, and take less calculation time at the expense of accuracy. See also sheet set. A sheet list table can be generated automatically with the Sheet Set Manager. The function keys F1, F2, and so on are also shortcut keys.
On the Mac, Command-S saves a file. The function keys Fn-F1, Fn-F2, and so on are also shortcut keys. The shortcut menu and the options it provides depend on the pointer location and other conditions, such as whether an object is selected or a command is in progress.
For programs that run under the Windows operating system, shortcut menus are now called context menus. They are also sometimes called right-click menus.
A shot can contain a static thumbnail of the saved view or camera motion that can be played back as an animation. ShowMotion User interface element where you can access named views shots that are stored in the current drawing.
The named views shots are organized by sequences and can contain movements. The sky displays with a color gradient between the sky horizon nearest to the horizon and the sky zenith opposite the horizon. See also ground plane. A slide-out panel contains additional tools and controls.
Objects with higher levels of smoothness have more faces, or tessellations. The snap grid does not necessarily correspond to the visible grid, which is controlled separately by GRID. SNAP snap resolution The spacing between points of the snap grid. A spatial index is used to locate what portion of the drawing is read when you partially open a drawing.
Saving a spatial index with a drawing also enhances performance when working with external references. See also intensity. This curve, called a spline-fit polyline, passes through the first and last control points unless the original polyline was closed. Start In folder The drive and folder path from where the product was started, which is determined either by the Start In attribute of the desktop shortcut icon, or by the folder in which a file is double-clicked.
Contains plot styles and their characteristics. As a mesh object is smoothed, the number of subdivisions increases. See also view category. The surface indication leader SIL is used to point to surfaces or faces rather than the edges of components. Symbols are inserted in drawings as blocks. TABLE table break The point at the bottom of a table row where the table will be split into a supplementary table fragment.
A table style contains at least 3 cell styles. When this happens, the tab list button appears. The files are deleted by the time you end the session. If the session ends abnormally, such as during a power outage, temporary files might be left on your disk drive. See also extended command history. TILEMODE A system variable that controls whether viewports can be created as movable, resizable objects, called layout viewports , or as nonoverlapping display elements that appear side-by-side, called model viewports.
See also viewport. Precede transparent commands with an apostrophe. Create and save as many UCS definitions as you need. The underground plane displays with a color gradient between the earth horizon nearest to the horizon and the earth azimuth opposite the horizon.
See also ground plane and sky. See also external reference xref. The up direction and the north direction are always constrained such that they are perpendicular to each other. See also world coordinate system WCS. UVW The coordinate space for a material. Most material maps are a 2D plane assigned to a 3D surface.
If you look at a 2D map image, U is the equivalent of X , and represents the horizontal direction of the map. V is the equivalent of Y , and represents the vertical direction of the map. W is the equivalent of Z and represents a direction perpendicular to the UV plane of the map. See also subset. ViewCube A user interface element that displays the current orientation of a model, and allows you to interactively rotate the current view or restore a preset view. MVIEW 2. BVMODE visibility state In a dynamic block, a custom property that allows only specified geometry to display in the block reference.
See also SteeringWheels. See also crossing selection and polygon window selection. This area is bounded by the wipeout frame, which you can turn on for editing and turn off for printing or plotting. Workflow Manager Workflow Manager is a user interface that allows you to access, manage, and customize cross-product workflows in an Autodesk suite. See also elevation and user coordinate system UCS. See also user coordinate system UCS. X,Y,Z point filters See coordinate filters. Very useful app!
This is all I’ve ever wanted. I cannot believe I didn’t search for a plug in earlier for this. This has made my week!!! This add in is very useful, I find myself reaching for it often via keyboard shortcuts of course.
I have been using this a while longer now, and I have another feature request. This would be a very simple way of centering objects with a shortcut instead of having to select and move by midpoint. The only addin that I bring from the panel and keep it at the work space.
Kudos to the development team…!!!! This is a very useful tool. Thanks for building and maintaining it! Any chance of adding a new alignment button? I would like the ability to “stack” wall tags directly on top of each other. It’s essentially a double alignment, center – center. Thanks for using it!
I rather keep the number of buttons to a minimum, even if some features are missing, to keep the overall user experience simple and intuitive. Why don’t you click on “Align Center” and “Align Middle” successively? The app should keep your selection between the two clicks. I would love it even more if it could be added to the quick access toolbar. An older version had this I believe but Revit isn’t allowing it. Overall I’m very happy with the tool and the results! Your idea is really interresting, but I rather keep the number of buttons to a minimum, even if some features are missing, to keep the overall user experience simple and intuitive.
I agree with this – sometime you want to move the majority of the tags TOWARDS the detail, and sometimes you want to move the majority AWAY from the detail – this could be placed in a separate “settings menu” that you only access to change defaults such as align to first selected, align to leftmost, align to rightmost, align to last selected I believe this would add a considerable amount of functionality, and I would use this addin constantly instead of just sporadically as i do now.
I am sorry to hear that your keyboards shortcuts are not working. Can you send me a screenshot of your issue? Thanks for your help! I am running out of options : Did you try to just type “Align” in the search bar of the Shortcut panel, without filtering by the Add-Ins tabs? You can also try to unistall and reinstall the Align plugin.
Looking at the picture you provided it shows the keyboard commands under the add-ins tab. Thank you for the free handy little plugin but I have to ask why the need for a leader for the addin to work? There are many times when I have a large amount of tags on a sheet and use zero leaders, I would still like tags aligned. This plugin should work just the same with or without the leaders.
Is this possible? Awesome simple App! Organize all your tabs. Thank you very much to the editor Simon Moreau. You can find helpfull online training from him on the Autodesk Web page also. I highly recommend his plugin for navisworks clash detection filter. Very useful add-on for annotating. Wish you could leave the commands expanded on your second screen so you don’t have to click the drop down to change alignment.
I really enjoy tagging several items and then being able to align left or right. The one thing I think that could make this even better is if the addin worked with “text boxes” also. Many times, we use text and tags together and if we could use one tool to align them, that would be amazing.
Even if there were two tools, Text alignment and Tag Alignment, it would be very helpful. Good job though! Keep up the good work! This is very good, but does it also comes in zip file non-msi version because my computer does not allow me to install this add-in without IT permission which I cannot have. BIM Digitally signed app. Description The Align tool allows you to align, distribute or organize selected elements, annotations, tags and text along the axis you specify.
Just select a few elements and the Align tool will sort them for you. Read Help Document. About This Version Version 1. Publisher Privacy Policy. Screenshots and Videos. Customer Reviews. Please update for RVT !! Please update it for Revit The most useful plugin for me. Pls, add support for Revit Johnes Hou June 13, Lachlan Miller July 26, It is a great tool, please update to !
Please can the developer update to This is an amazing app and i use it everyday. Carl Mitchell June 13, Very simple app, but is extremely useful! This little plugin saves loads of time.
Autodesk autocad lt 2016 manual free. Autodesk AutoCAD 2016 manual
Type 2 and press Enter see Figure 5.
